|
 |
Studio Construction Service Inc. has been designing and building a wide variety of Modular and Custom Acoustic treatment systems for a long list of satisfied clients in the recording, performance and radio industry for more than two decades. It has takenyears to develop and perfect the method and materials required for “doing something right”, and our final product surpasses what is readily available in the industry.
We’ve designed and built room to room, and facility after facility,experimenting with various approaches, testing the room and our procedures before and after the installation of our products. That’s what has defined us as leaders in our area of specialty. Classic cloth, wood, and tight tolerances are hard to match. |
|
| Modular Acoustic Treatments |
| Definition of Modular Products: |
Treatments designed and fabricated to install and or to be re-installed at new studio locations, (if you plan to move) more easily than “built in” installations. They’re typically standard sizes, which apply to the material that’s used to produce that panel. (i.e. 2’ X 2’, 2 X 4’, 4 X 4’, 4 X 8’), with custom sized available upon request.
Typically used for: Recording studio application, ProTools workstation areas, for engineers mix or critical listening positions (i.e video post rooms, T.V. rooms), isolation, tracking or talent rooms, voice-over rooms, sound lock corridors, radio broadcast rooms, performance rooms, attenuation of office, meeting or noise problem areas, etc. |
Wall Treatments |
Performance Post, Los Angeles |
|
Universal Digital, Nashville |
|
- Wall absorbers
- Wall diffuser/absorbers
- Wide band wall absorbers
- Diffusers
- Corner traps
|
|
Velvet Elvis,
Nashville |
Write Note Studios, West Palm Beach |
|
-
Suspended Geometry
-
Acoustic Ceiling Modules
|
| |
| Custom Acoustic Systems |
| Definition of Custom Products: |
Designed and fabricated to custom specifications and sizing, and installed to achieve higher standards of
acoustic performance, and visual appearance. Typically used for: Recording facilities, and areas defined in
modular treatments, radio broadcast, T.V, and video post facilities, church assembly halls, etc. |
Design-Build Treatments |
Straight Gate
(A room) Detroit |
Straight Gate
(B room) Detroit |
Jeff Martin, Los Angeles |
Doreonne Stramler, Detroit |
|
- Acoustic Packages
- Monitor Sofits
- Isolation Racks
- Window Systems
|
| |
- Wave guide walls and geometry, for reduction of room modes
Deep, (wide frequency band) pressure absorption
- Bass traps
- Wall and ceiling systems that incorporate HVAC penetration attenuation,
or air silencing and movement
- Walls that incorporate speaker systems, TV/monitor systems or equipment
isolation boxes, custom sound locks, doors and talent windows
- Double wall or mechanically isolated floor systems
- Tuned traps or Helmholtz resonator systems
|
|
|
*Note: Designing a room from ground up (or minimum, a consult or two) with a reputable acoustic consultant/studio designer
is the appropriate place to start when you’re interested in reducing the amount of mistakes an inexperienced person’s going
make in this complicated process. If your floor plan for the proposed area is already built, then the acoustical math is set in
motion by the boundaries of that said room, and you’ll be left to deal with that acoustical formula in the most efficient, and
cost effective manner. Call us! |
|
|
|
|
